sE Electronics sE7 Small-Diaphragm Condenser Microphone (Single)

Description

Designed for drums, guitars, pianos, or indeed, any application requiring a pencil-mic design, the sE Electronics sE7 is a back-electret, small-diaphragm condenser microphone. It sports a cardioid polar pattern. Fashioned from class-A circuitry and utilizing a transformerless output, the microphone captures sound with clarity and neutrality across its frequency response, thus eschewing overly harsh highs and aiding in a pleasurable bottom end.

A switchable 20 dB attenuation pad allows you to use this microphone with loud instruments, doing so with a favorable signal-to-noise ratio. A low-cut filter at 80 Hz helps filter out rumble and other unwanted bass issues. Thus, you can use the sE7 in both close and distant miking scenarios.

An all-metal chassis provides a robust, roadworthy construction, while gold-plated XLR terminations ensure security in the connecting process. A mic clip and a windscreen are included.

Specifications

Capsule Type: 1/2“ back-electret condenser capsule

Polar Pattern: Cardioid

Frequency range: 20 Hz – 20 kHz

Sensitivity: 19 mV/Pa (-34.5 dBV)

Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)

Equivalent noise level: 16 dB(A)

Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)

Signal to Noise Ratio: 78 dB

Low-cut filter: 80 Hz, 6 dB/Oct, switchable

Attenuation Pad: 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: <200 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)

Weight: 128 g