PreSonus R65 V2 Studio Monitor (Single)

Description

You won’t miss a thing.
Clarity is king—and with the R65 V2s, you’ll hear every single detail in your music: the gentle breath in every exhale, the subtle finger noise in a nylon-string classical guitar; the nuanced overtones of brass and woodwinds; and exquisite reverb tails that decay gracefully into the void. Not only will your mixes sound their absolute best on R65 V2, but you’ll also be able to hear trouble spots in your tracks with surgical clarity. If you’re mixing or mastering high-resolution audio, the R65 V2 will ensure that you’ll hear every detail captured in your recordings.

Air and transient response.
Driven by a dedicated 65 watt Class A/B amp, the R65 V2’s custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT’s astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.

Wide with pride.
The unique AMT design also allows the R65 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R65 V2’s unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it’s less subject to room-anomaly interference, the R65 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.

The lowdown on the down-low.
R65 V2’s woofer is six and a half inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.

The new versatility.
Improving the respected R-series classics wasn’t easy, but we found a way: by giving you more control than was available on the original R65. The updated R65 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.

Studio monitor connections.
Of course, you also get classic PreSonus monitor connectivity, as R65 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source.

Accuracy defined.
The R65 V2 studio monitor provides lifelike audio reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. The exact same AMT technology that provides the R65 V2’s natural-sounding, honest playback also ensures that potential trouble spots in your mixes won’t slip past your critical ear.

In the Box
PreSonus R65 V2 Studio Monitor with Air Motion Transformer Tweeter
Studio Magic Software Bundle
Limited 1-Year Warranty

 

Specifications:

Inputs
1- Balanced XLR
1- Balanced ¼” TRS
1- Unbalanced RCA

Performance
Frequency Response 45 Hz – 22 kHz
Crossover Frequency 2.7 kHz
LF Amplifier Power 75W Class D
HF Amplifier Power 65W Class D
Peak SPL (@ 1 meter) 104 dB
LF Driver 6.5” woven composite
HF Driver Type AMT
Diaphragm 6.8-inch2 (4,400 mm2)
Equiv. Diaphragm ø 3” (75 mm)
Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
SNR (typical, A-weighted) >100 dB

User Controls
Volume Range A-type taper
High-frequency Control +/- 6dB shelf @ 10kHz
Mid-frequency Control +/- 6dB @ 1kHz
Low Cut Flat, 80Hz, or 100Hz
Acoustic Space Flat, -2dB or -4dB

Protection
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse

Power
Factory preprogrammed 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Standby Power 0.5W

Cabinet
Vinyl-laminated, medium-density fiberboard

Physical
Width 8” (203 mm)
Depth 10.3” (261 mm)
Height 13” (328 mm)
Weight14.7 lbs (6.65 kg)

You've just added this product to the cart:

Brands