LD Systems Roadbuddy 10 HS Battery-Powered Bluetooth Speaker with Bodypack and Headset Microphone

Description

For special events, presentations, fitness instruction, and more, the LD Systems Roadbuddy 10 HS Battery-Powered Bluetooth Speaker with Bodypack and Headset Microphone delivers versatility and power in a portable package. Its two-way speaker system consists of a 10″ custom woofer and a 1″ horn-loaded compression driver driven by 480W of Class-D amplification. With powering methods including an internal 8-hour rechargeable battery and an efficient switching power supply, the Roadbuddy 10 HS is ready for the road.

The Roadbuddy 10 HS features a headset microphone, a wireless bodypack transmitter, and a built-in UHF receiver, forming a reliable wireless system that operates in the 584 to 607 MHz frequency band. The integrated media player incorporates a backlit multifunction display, mode and transport buttons, and support for an array of music sources such as 3.5mm or RCA inputs, wireless streaming via Bluetooth, an SD card, or a USB flash drive. The included IR remote control provides comprehensive access to volume, EQ, track selection, and more. The onboard mixer also offers two XLR-1/4″ combo jacks that are switchable for mic or line level, per-channel volume controls, 2-band EQ, echo, and master volume.

The Roadbuddy 10 HS is easily transportable, thanks to built-in caster wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two handheld microphones. The Roadbuddy’s polypropylene cabinet is durable, lightweight, and stand-mountable.

10″ custom woofer and 1″ horn-loaded compression driver yield a frequency response of 55 Hz to 18 kHz
Class-D amplification (480W peak / 120W RMS) drives the speaker components to a maximum SPL of 115 dB
Accepts mic-/line-level sources via XLR-1/4″ combo jacks, and stereo music playback devices via 3.5mm and RCA aux inputs
1/4″ line output for connection to a main PA or secondary powered speaker
Pre-installed UHF receiver with channel selection, AF/RF indicators, adjustable volume, and mute level
Install a second UHF receiver (available separately) to allow simultaneous use of two wireless microphones
Wireless bodypack transmitter—powered via two AA batteries (available separately)—with on/off switch, adjustable input sensitivity, and 3-pin mini-XLR input
Supports powering via AC connection or internal battery
LED indicators for battery level and charging status

Sales within Singapore: “Products are supplied with a standard 1-year warranty supported through the Singapore Authorised Distributor for LD Systems”

Sales to customers outside of Singapore: Products are supplied with a standard 1-year warranty. RMA requests will be coordinated through Singapore.

 

Specifications:

LD Systems Roadbuddy 10 Specifications:

Portable PA System
Speaker Configuration 1 x 2-Way Loudspeaker
Amplifier Power Rating 120 W RMS
480 W Peak
Amplifier Class Class-D

Speakers
Enclosure Type Bass-Reflex
HF Driver 1″ / 2.5 cm Horn-Loaded Compression Driver
LF Driver 10″ / 25.4 cm Woofer
Magnet Ferrite

Signal Processing
EQ HF Shelf
LF Shelf
Effects Echo (Type Unspecified)

Microphone
Form Factor Headworn
Output Connector TA3/Mini XLR Female

Performance
Frequency Response Wireless:
50 Hz to 17 kHz
Speaker:
55 Hz to 18 kHz
Maximum SPL 115 dB
THD 0.002%
Protections Overcurrent, Short Circuit

Connectivity
Audio I/O 1 x 1/4″ Line Output
2 x Combo XLR-1/4″ Input
1 x 1/8″ / 3.5 mm Input
1 x 2RCA Input
USB USB Type-A (Media Playback)
Media Playback 1 x SD
Media & File Formats Supported MP3, WAV, WMA

Wireless
Number of RF Channels 16
RF Frequency Band 584 to 607 MHz
RF Output Power 10 mW
Transmitter I/O 1 x TA3/Mini XLR 3-Pin Male Input
Antenna Receiver:
N-TNC
Modulation FM

Power
Battery Type System:
Rechargeable 12 V Lead-Acid
Bodypack Transmitter:
2 x AA
Approximate Battery Life 8 Hours
Battery Charging Time 10 Hours
Internal Battery Capacity 5 Ah
AC Input Power 100 to 240 VAC, 50 / 60 Hz

Physical
Mounting 1.4″ / 35.56 mm Pole Socket
Construction Material ABS, Polypropylene
Operating Temperature 32 to 122°F / 0 to 50°C
Operating Humidity 10 to 70%
Dimensions 16.3 x 20.7 x 12.9″ / 41.5 x 52.5 x 32.8 cm
Weight Bodypack Transmitter:
2.8 oz / 80.0 g (without Batteries)
System:
36.4 lb / 16.5 kg

You've just added this product to the cart:

Brands