Description

With an EQ heritage that has produced countless industry standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-15 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 15-band channels of 2/3-octave equalization, the iEQ-15 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4” and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

 

The iEQ series represents a major step forward in the performance of EQs. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-15 offers out of this world specifications with a downto- earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-15 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-15 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.

Recommended for: Portable, Tour.

 

Features

  • Advanced Feedback Suppression (AFS™)
  • Type V™ Noise Reduction
  • PeakStopPlus® Limiting
  • 2/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of +6 or +15dB
  • 18 dB per octave 40Hz low-cut filter
  • +12dB input gain range
  • XLR, TRS and Euroblock Inputs and Outputs
  • Internal Toroidal Transformer
  • Frequency Response of 10Hz to 22kHz
  • Dynamic range of greater than 113dB
  • User Power Up Features
  • Relay Bypass for Power Failure System Protection

 

SPECIFICATIONS

Input Connectors 1/4″ TRS, female XLR (pin 2 hot), and Euroblock
Input Type Electronically balanced/unbalanced, RF filtered
Insert Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4″ TRS, male XLR (pin 2 hot), and Euroblock
Output Type Active-balanaced/unbalanced, RF filtered
Output Impedance Balanced >120 ohm, unbalanced >60 ohm
Max Output >+20dBu balanced/unbalanced into 2k ohm or greater
Frequency Response 20Hz to 20kHz, +0.5/0.25dB
Dynamic Range >113dB, “A” weighted
THD+Noise <0.003%, typical at +4dBu, 1kHz
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Noise Reduction Up to 10dB of dynamic broadband noise reduction
Digital Resolution 24 bits
Sample Rate 48kHz
Latency 2msec
Operating Voltage 120VAC 60Hz, 220/240VAC 50/60Hz
Power Consumption 17 Watts
Power Connector IEC receptacle
Dimensions 3.5″ H x 19″ W x 7.9″ D
You've just added this product to the cart:

Brands